back to listings SME Profile: Cadillac Plastic Limited

Unit 1 Rivermead Drive, Westlea, Swindon, SN5 7EX

E:  info@cadcouk.com  |  W:  www.cadillacplastic.co.uk

 

ABOUT US

Cadillac Plastic is a leading supplier of high performance plastic films and filmic adhesives across a range of industry sectors. Based in Swindon, Wiltshire; the company has over 40 years’ experience in the plastic films industry. During this time, the business has developed into new markets and sectors, and grown to become an international distributor.

With our comprehensive, in-house conversion facilities, we can cater for individual sheeting and slitting requirements at no extra cost; enabling customers to save money through the elimination of waste. We can offer bespoke product solutions and include die cutting, laminating and perforating within our portfolio.

We are a customer focused business, proud of our longstanding relationships with many of our suppliers and customers. Our team has the skills and expertise to provide each of our customers with dedicated, one-to-one account management, irrespective of size. This structure enables us to deliver to all of our customers a prompt, accurate and efficient service, supporting in product selection and in finding the most appropriate solutions to your needs.

Environmental Responsibility

We operate in a responsible and ethical way. We are aware of environmental issues and work hard to reduce the environmental impact of our business.

We are committed to waste reduction, and regularly monitor our waste output as well as recycling, and our usage of gas, water and electricity in order to meet and exceed all environmental regulations and targets.

Our Suppliers

All of our products are sourced from leading manufacturers, so we can be confident in our commitment to quality and consistency.

Some of our suppliers include:

  • 3M
  • Transcontinental Advanced Coatings
  • Sabic
  • DuPont
  • Folex
  • Nitto
  • PI Advanced Materials
  • Liveo
  • Avery Dennison
  • MacDermid Alpha Electronics

Industries we serve

Cadillac Plastic is proud to supply products to customers in a wide range of industry sectors which include:

  • Automotive and Mass Transport
  • Aerospace
  • Defence
  • Electronics
  • Engineering
  • Medical and Healthcare
  • Archiving and Storage

 

SERVICES

We deliver the products you want, in the way you want, when you want. We provide high quality film products that are tailored to suit your application.

Our aim is not only to meet, but to surpass our customers’ expectations in all respects. Our most important measure of success is your total satisfaction. In our most recent customer service survey, 99% of customers would recommend us to others.

As well as providing immediate dispatch of standard stock sheets and rolls, we can offer most materials in custom sizes.  This helps you by eliminating unnecessary waste and reducing costs, and helps Cadillac Plastic to reduce the environmental impact of the business through our ongoing commitment to complying with environmental regulations.

Custom Conversion

Cadillac Plastic offers specialist custom conversion services which include sheeting, slitting, guillotining, laminating and die-cutting.

All conversion processes are carried out in a controlled environment and under our ISO 9001: 2015 certified Quality Management System. The use of SPC techniques in conversion, and a commitment to continuous improvement, ensure that quality standards are both tightly controlled and consistently maintained.

We can slit and sheet all types of roll materials. From 12μ up to 750μ thick and can guillotine material up to 1.5mm.

Our experienced team has the expertise to assist you in finding the most appropriate solution to your needs and by providing technical support services which are second to none.

Find out about our Made to Measure service.

CUSTOMER TESTIMONIALS

 

PRODUCTS

We stock a comprehensive range of products which makes us a one-stop-shop for customers in many industries. We have strong relationships with major manufacturers such as Sabic, DuPont, 3M and MacDermid, which allows us to supply a wide range of materials. We supply everything from Polyester, Polycarbonate and Polyimide film to Adhesive films and tapes, as well as Tyvek and even printable lacquers.

Our modern and comprehensive conversion facilities enable us to provide slitting, sheeting, laminating and die-cutting services, carried out in a controlled environment and to the most exacting tolerances. We can offer custom sized sheets and rolls of most materials enabling our customers to eliminate unnecessary waste and reduce costs.

Quality Assurance

Our quality assurance procedures meet and in many cases exceed ISO 9001:2015 standards. The use of SPC techniques in conversion, and a commitment to continuous improvement, ensure that quality standards are both tightly controlled and consistently maintained.

Our aim is not only to meet, but to surpass our customers' expectations in all respects, and our most important measure of success is your total satisfaction.

Click below to see each of these product ranges:

 

APPLICATIONS

The products we supply at Cadillac Plastic are high quality materials that can be used in a wide variety of applications from manufacturing, to electronics, lighting or printing. Our team have a vast knowledge of our products and their properties, so they can give you the best advice on your requirements for an application.

Our high specification films and adhesives are suitable for applications such as aerospace. automotive and electrical. Many of our films are ideal for printing in both screen and digital formats, and with our bespoke conversion services, you can order the exact size you need.

If you aren't sure what substrate you will need for your application, give us a call, we are happy to help.

Products by Application:

Aerospace - Cadillac supplies innovative products from some of the leading manufacturers of materials specifically designed for aircraft interiors.

Membrane Switch Panels - We provide a full range of products for membrane switch panels, making Cadillac Plastic a ‘one stop shop’.

Point of Sale and Graphics - We stock a wide range of Polycarbonate, PVC and Tyvek - including Fire Retardant grades - which can all be used within this application.

 

CERTIFICATIONS

Cadillac Plastic Ltd is proud to have achieved the following certifications:

  • ISO 9001 2015 (Quality Management Systems)

ISO 9001 CERTIFICATE

  • ISO 45001 2018 (Occupational Health and Safety Management Systems)

ISO 45001 2018 CERTIFICATE

  • ISO 14001 2015 (Environmental Management Systems)

ISO 14001 2015 CERTIFICATE

Supplier Locator Free Text Search Area

To find the relevant supplier by company name, product or service, please use the free text search box provided below:

[ Search tip: Separate words with spaces ]

Latest Report: AI, digital transformation, and vulnerable customers