Ministry of Justice
Calculate Release Dates
HMPPS Digital, in partnership with prisons, are building a service to improve the calculation of release dates by freeing up time for staff, improving accuracy and making sentences easier to understand for staff and prisoners.
I’m Frazer Rhodes and I’m a Service Owner in HMPPS Digital (Her Majesty’s Prison and Probation Service) working with the Calculate Release Dates team which is part of the replacing legacy technology strategy.
Emily Docherty, I’m a Hub Manager currently working within the OMU (Offender Management Unit) at HMP Holme House. My role involves overseeing the admin processes that fall under offender management, including Sentence Calculation.
It is my responsibility to ensure sentence calculations are accurate upon transfer and I am also the final sign-off for sentence calculations upon release from prison.
Emily: Currently, the process of completing a sentence calculation check involves using a combination of the existing prison system (NOMIS), paper copies of imprisonment orders, remand warrants, and trial record sheets along with a manual check carried out with a calculator and the relevant calculation sheet.
There is a lot of pressure on the staff responsible for sentence calculation checks as ultimately the responsibility lies with them. Sentence calculation errors can have a detrimental impact on not only the establishment but could also pose a serious risk to the public too. We therefore must ensure each calculation is accurate. This involves checking, double checking and checking again. The NOMIS system that we currently use is quite dated. New legislation can take a while to be updated onto the system resulting in release dates populating incorrectly, making our job a bit more difficult than it already is.
Problems with the current approach
Emily: The main problems we have are:
- Time spent on calculating dates – Sentence calculation can be extremely complex. There are a lot of different sentence types and scenarios which are all calculated in different ways. A complex sentence can take a long time to calculate and with several people involved in the checking process, the amount of time spent on one calculation adds up.
- Explaining release dates to others - Explaining sentence calculation to someone who is not trained can be challenging. It can cause confusion and result in us having to work out how to explain situations in different ways.
- The pressure it puts on staff/fear of release in errors – One thing I have found is that staff seem to lack confidence in their own ability when it comes to sentence calculation. This is due to the pressure and risk of potentially making a mistake. Though calculation errors are rare, if a mistake result in a release in error, the responsibility lies with whoever has been involved in the checking process
- Interruptions when calculating – Ultimately, sentence calculation is not our only job, meaning we have to juggle the complexity of sentence calculation with other tasks throughout the day. Interruptions whilst carrying out a calculation can result in things being missed, potentially resulting in release in errors/prisoners being held unlawfully.
- NOMIS not calculating certain dates correctly – On occasion, P-NOMIS struggles to calculate dates correctly, this is usually when an individual has a complex calculation with quite a lot going on or new legislation has been introduced. When the dates on NOMIS don’t match the dates on the manual calculation sheet, staff begin to second guess themselves.
- Errors from other establishments – For various reasons such as lack of staff, training and workload pressures, errors from other establishments can sometimes be picked up upon transfer. This can be frustrating for staff as it creates more work for them; it even sometimes results in us having to release prisoners immediately due to a sentence calculated incorrectly and their release date has passed.
Frazer: Ultimately whenever you have humans in a process there is risk that errors will occur. The personal responsibility that staff have when it comes to calculations means that accuracy and trust in digital services is paramount.
Establishing the vision, priority and prototyping
Frazer: In May 2021, a digital team was set the task of transforming how we currently calculate release dates. The vision established is a service that enables the easy and accurate calculation and recalculation of sentences which has the flexibility to quickly incorporate changes in circumstances, policy or any other factors that affect sentence length, meeting with GDS standards.
As with any agile software development we prioritised where to place our efforts. This meant focusing on one type of user initially: an individual who calculates release dates based in the offender management unit. We also focused on standard determinate sentences (SDS) to begin with.
What people thought of the prototype
Frazer: Users liked the design of the service, how the information was presented and the opportunity to review. They particularly liked how the calculations were explained and the inclusion of aspects like accounting for leap days as it’s something they have to be aware of.
“It’s near and clear, no searching all over”
'it's very easy to navigate and the concurrent/consecutive references are clear. I've not seen it come up with any wrong dates so far, which is a good thing!'
“The layout is much clearer, fill out a few boxes per page. Not muddled. User friendly layout”
“If there is a problem it’s much easier to see why and how to fix it”
Moving on from prototyping & Working with HMP Holme House
Emily: We feel really lucky to be included as one of the six pilot locations across the country. Involving the staff who will be directly using the system daily is a really positive way of working and is the right step forward. Staff have been involved in everything from the way the system looks, to providing feedback on what information is useful and what is not. Our aim is to continue to provide feedback to ensure the system is the best it can be for all users.
Frazer: The initial testing gave the team enough confidence to proceed to private beta, where we produce functioning software and started to work with a small number of prisons. We approached three prisons initially, HMP Hewell, HMP Holme House and HMP New Hall. This has now expanded to include HMP Bristol. HMP Kirkham and HMP Thameside.
We wanted to hear first hand from colleagues involved in sentence calculation but also to discuss how we intended to work. In the past, prison technology has been developed remotely and built on assumed needs rather than tackling the real issues that users face'.
Emily: Moving to a system that does a calculation for us, without the need of a manual check feels like something out of reach. Understandably, there is some apprehension on solely relying on a computer system to do the job for us, especially when the repercussions could be detrimental. This is why, at this stage it is so important to work together. We need to ensure we get the system as accurate as it needs to be in order to build up that trust.
Frazer: We plan to focus efforts on both the inputs upstream of the calculator such as the sentence and offence information as well as adding more complex sentence types to the calculator. We’ll continue to work with our six pilot prisons including HMP Holme House, to continuously learn and improve the service.
Emily: The team at Holme house are really looking forward to getting started with the system and supporting the project throughout its journey. It is an extremely interesting piece of work, with the potential to have a real positive impact on prisons across the country. Hopefully, it will transform the way OMU departments work and we are grateful to have been involved from the beginning.
Contacts for further information:
Louise Ball, Product Manager: email@example.com (@LouiseB33083874)
Frazer Rhodes, Service Owner: firstname.lastname@example.org (@frazer_HX)
Latest News from
Ministry of Justice
Location of first ground-breaking Residential Women’s Centre revealed20/05/2022 16:15:00
Site in Swansea will pioneer new approach to tackling female offending.
£300 million to cut youth crime and make streets safer20/05/2022 11:05:00
Biggest funding package in a generation to tackle youth offending and cut crime.
1,500 new probation officers to protect the public20/05/2022 10:15:00
More than 1,500 new trainee probation officers have been hired this year – hitting the government’s target while helping to cut crime, make streets safer and protect the public.
Review: UCD Conference Day19/05/2022 15:33:00
Blog posted by: Nikola Goger, 18 May 2022 – Categories: UCD Conference Day.
Number of ex-offenders in work picks up speed due to turbo-charged push to cut crime16/05/2022 15:15:15
Over the last year, the proportion of ex-offenders in work 6 weeks after release increased by more than half.
New airport-style security in prisons sees record level of drug busts16/05/2022 13:48:00
Tougher airport-style security rolled out across the prison estate in England and Wales has intercepted almost 20,000 attempts to smuggle illegal contraband behind bars.
New Charter to improve media access to courts12/05/2022 12:20:00
A new Reporters’ Charter outlining the rights and responsibilities of court reporters has been launched to boost transparency in the justice system.
New protections for rape victims available at more Crown Courts12/05/2022 11:25:00
More victims of rape and sexual offences will be spared the stress of being cross-examined in court under a measure rolled out to a further 14 locations today (12 May 2022).