back to listings SME Profile: E3 Design

E3 Design

Unit 8, Walker Davidson House, High Street, Newburn, Newcastle-upon-tyne, NE15 8LN

t: 0191 430 2603 e: hello@e3design.co.uk w: e3design.co.uk

We are E3Design – An Industrial Design company based in Newcastle-upon-tyne.

Formed in 2007, E3Design has over 30 years of extensive commercial design experience gained from working across multiple sectors of the UK and overseas.  

These contracts include:  Consumer Products, Structural Packaging, Medical supplies, Lighting, Industrial, DFM, Fashion and Graphic Design. Alongside the above, we also come with a wealth of technical knowledge in Prototyping, Tooling and Support, FEA and Product Analysis and CAD Engineering Support.  
 
The variety of established and proven skills within our team means that we have an unsurpassed expertise in all of our long term and current work, while still having the capacity to create, develop, and maintain fresh and innovative ideas for the future.  
 
We design products that are unrivalled in the current market. You can fully trust that from concept generation right through to DFM, that E3Design are the right choice. 
 
This is simply because design-to-manufacture is what we do best.  Read more about us

 

We design products

We have an innovative and creative design team with a proven record of delivering products.

We have completed projects for some of the biggest brands in the world, turning ideas into reality, and assisting with any and all of the stages in-between.

Browse Projects

 

 

Services

Along with our many years of experience, comes a vast amount of technical knowledge. We’re here to help you turn your product design ideas into reality, and assist with any or all of the stages in-between.

At E3Design we are not only equipped to offer creative design services, we also boast abilities in Prototyping, Tooling and Support, FEA and Product Analysis as well as having the capabilities to offer CAD Engineering Support. If you’re seeking advice, guidance, or support from experts in Industrial Design, Engineering Design or Product Development, we can help.

Design for Manufacture

The variety of established and proven skills and knowledge within our team means that we have an unsurpassed expertise in all of our long term and current work, while still having the capacity to create, develop, and maintain fresh and innovative ideas for the future.  

Our creative design team has a proven record of delivering the product, with many companies returning time and time again to use our services. 

Our designers have specialist skills in product, industrial design and development, with particular skills in design for plastic injection moulding and high volume manufacture. 
 
E3Design has a wealth of experience in Consumer Product, Structural Packaging, Medical, Lighting, Industrial, DFM and even Fashion.

 

CAD Support

CAD is mainly used for detailed engineering of 3D models or 2D drawings of physical components. It is also used throughout the engineering process from conceptual design and layout of products, through strength and dynamic analysis of assemblies to definition of manufacturing methods of components. 

E3Design can offer competitive rates for CAD support to your business on a contacts basis. A bolt on service that you can switch off and on as demand requires.

Prototyping

We always encourage our clients to manufacture a prototype of their product. The level and detail required in prototyping can vary greatly, but we believe it is essential to have a physical artefact for evaluation and approval at the critical stages of a project.

​We utilise our in-house 3D printing capability and outsource as well as use our supply chain of companies in the UK, Europe and the Far East to supply all levels of prototyping. This can range from a simple machined part to a full-scale appearance model. 

Working with our suppliers we aim to give our clients the best value prototype that is suitable for that stage of development. 

 

Tooling & Support

E3Design has many years of experience in designing products that are to be produced in high volume and we are proud to confirm that approximately 95% of everything E3D designs actually ends up in manufacture.  

​Efficient material usage is critical for a cost effective manufacturing solution and our experience allows us to design products that optimise strength with minimum wall section.  Consideration of cavitation in tooling, and how the product will be moulded and ejected are critical in the production process.

We have significant in-house tool making experience with our Technical Director having started his career by completing a tool making apprenticeship and going on to become the Technical Director of a well-known Rapid Tooling and Manufacturing company.

We often provide tooling consultancy and advice to our clients outside the actual design projects we are working on. Our approach to product aesthetics and economic material usage, combined with hands-on manufacturing experience and ergonomic design, has led to us working with some of the biggest companies in the world. ​

 

 

CONTACT

 

 

Supplier Locator Free Text Search Area

To find the relevant supplier by company name, product or service, please use the free text search box provided below:

[ Search tip: Separate words with spaces ]

Your Guide to Public Sector Payments 101