Defence Science and Technology Laboratory
£1.5 million invested for CBR robotics and AI research
Dstl is exploring the potential for cutting-edge autonomous robotic solutions to detect life threatening chemical, biological and radiological (CBR) hazards.
The current wide area capability is based on specially adapted armoured Fuchs vehicles. For a number of years Dstl - the science inside UK defence and security - has been researching the potential of using autonomy and unmanned systems to survey areas for CBR materials.
This new investment with industry will help develop a concept demonstrator to be used in wide area experimental trials.
Dstl Project Lead, Ian Napier, said:
There is an understandable desire to remove the need for people to enter into hazardous areas, even if they are inside a protected vehicle.
Recent developments in autonomous ground and air vehicles offer up some exciting opportunities to develop autonomy for CBR work.
However, before making such a step change in our approach, we need to fully understand the variety of potential CBR scenarios and the tasks that may need to be undertaken by autonomous systems.
Dstl has already received great support and engagement from those within the military CBRN community. The project is now keen to expand out beyond MOD and see what industry can bring.
Dstl has contracted HORIBA MIRA Ltd to adapt a VIKING 6x6 uncrewed ground vehicle (UGV) and integrate a suite of chemical and radiological sensors supplied by Dstl. Making good use of open architectures should allow the development of a CBR sensor suite on a standard ‘pallet’, which could then be mounted onto the appropriate platform as and when required.
The VIKING UGVs
Last year Dstl purchased 3 all-terrain VIKING 6x6 uncrewed ground vehicles, supplied by HORIBA MIRA, which are capable of carrying payloads of up to 750kg and using advanced AI-based autonomy with GPS-denied navigation.
These VIKINGS were purchased under project THESEUS for autonomous logistics resupply missions and are being used for early de-risking work to increase MOD’s understanding of the capabilities and limitations of these systems in areas such as mobility, vulnerabilities and safety.
This new contract will now also fund the development of autonomy algorithms to allow the CBR sensor outputs to help drive the behaviour of the UGV, to detect and map areas of chemical or radiological hazards. One of the VIKINGS will undergo minor modifications to allow it to carry and interface with the CBR sensor pallet.
Andy Martin is the Dstl Technical Lead for the CBR Trials and Experimentation work package. He said:
This is a great opportunity for us to get a better understanding of the possible strengths and weaknesses of autonomous systems for CBR Recce and Survey. They appear well suited for dull and dangerous tasks. But can they fully replace manned systems, or are there some tasks where people are still required to be present?
The purpose of these trials is not to develop a prototype new system, it is to gather the evidence we need to determine what operational concepts are likely to be successful.
Andy Maloney, Chief Engineer for Defence and Unmanned Solutions at HORIBA MIRA, said:
We are delighted to be working again with Dstl, MOD stakeholders and front line users in this important area.
The project enables us to build upon our previous autonomous hazardous area survey work with small robots and leverage the capability of our much larger VIKING UGVs and their leading AI-based autonomy.
The concept demonstrator will include new sensors and autonomous behaviours, modular autonomous control equipment (MACE), the ATLAS GNSS denied navigation system and a user interface provided by our Base Station RAS management software.
The resulting system will enable significant sensor payloads to be carried over large areas at speed and new autonomous CBR survey concepts to be explored.
Latest News from
Defence Science and Technology Laboratory
NATO Award for Dstl Fellow19/05/2022 16:10:00
Dstl Fellow Bharatkumar (“Bharat”) Patel has received a NATO award for his significant scientific contribution to modelling and simulation and its impact on military capability.
MOD Director of Defence Innovation Clare Cameron joins the Ploughshare board19/05/2022 10:20:00
Ploughshare, the company that finds new and inspiring uses for government inventions, is pleased to announce the appointment of defence innovation leader Clare Cameron to its board.
‘A Joint Effort’ between the UK and Australia will fast-track innovative approaches to joining materials for Defence.16/05/2022 14:20:00
DASA and the Materials for Strategic Advantage programme recently held a joint showcase for the suppliers who gained funding via the second phase of the first parallel UK / AUS bilateral “A Joint Effort” call for innovation.
Dstl shows off its world-leading science to Head of the UK Armed Forces16/05/2022 12:10:00
Chief of the Defence Staff (CDS), Admiral Sir Tony Radakin, has made a special visit to the Defence Science and Technology Laboratory (Dstl).
First UK satellite launch in summer 202211/05/2022 10:17:00
As part of a three-year mission two satellites will operate close to Earth experimenting and test imaging and interoperability.
DASA seeks ways in which human augmentation can benefit defence and security05/05/2022 10:05:00
DASA has launched a new Innovation Focus Area to find Generation-After-Next (GAN) human augmentation technologies for use in defence and security
Bumper awards for Dstl’s world-leading science21/04/2022 15:10:00
The MOD’s Chief Scientific Advisor commendations recognised the whole organisation’s work during the COVID-19 pandemic as well as individual achievements.
Register for the 2022 international Chemical Weapons Demilitarisation Conference11/04/2022 12:10:00
Dstl will host the 24th CWD Conference, bringing together international experts and promoting collaboration to achieve a future free from chemical weapons.